USRobotics U.S. Robotics SureConnect ADSL Ethernet/USB Router - Manual (Page 163)

U.S. Robotics SureConnect ADSL Ethernet/USB Router User Guide
1.20.1 setmode
setmode <mode>
Sets the mode of the ADSL link to ANSI (T1.413), G.DMT, G.Lite, or multi-mode. After
executing this command, the configuration can be saved and the next time the machine is
rebooted, the mode will take effect.
<mode> The mode may be ansi, gdmt, glite, or multi.
1.20.2 readcmv
readcmv <cmv_index> <offset>
The ADSL Configuration and Management Variables (CMV) can be read with the readcmv
command. The CMV variables are documented in “CMV Reference Manual”. This command will
only provide meaningful results when the link is operational.
<cmv_index> The cmv index may be one of the following values.
Note that they must be specified in uppercase: ADPT, CNTL, CODE, DIAG, DOPT, FLAG, INFO,
INTL, MASK, OPTN, PFCL, PFRX, PFTX, PSDM, RATE, RXDA, STAT, TEST, TONE, TXDA,
UOPT.
<offset>
This is a numeric value between 0 and 65535.
1.20.3 writecmv
writecmv <cmv_index> <offset> <value>
The ADSL Configuration and Management Variables (CMV) can be written with the writecmv
command. The CMV variables are documented in “CMV Reference Manual”. This command will
take effect only after the link is reconnected.
<cmv_index> The cmv index may be one of the following values.
Note they must be specified in uppercase: ADPT, CNTL, CODE, DIAG, DOPT, FLAG, INFO,
INTL, MASK, OPTN, PFCL, PFRX, PFTX, PSDM, RATE, RXDA, STAT, TEST, TONE, TXDA,
UOPT.
file:///P|/T_WRITER/Documentation/Released/9003%20(Guinness)/User%20Guide/9003%20(Guiness)%20prac%20template/cli.htm (39 of 71) [11/6/2002 8:58:45 AM]