USRobotics U.S. Robotics SureConnect ADSL Ethernet/USB Router - Manual (Page 95)

U.S. Robotics SureConnect ADSL Ethernet/USB Router User Guide
To set up a route…
1. Enter the RIP status. Set RIP Status to either “on” or “off.”
2. Enter a number for the version. Either set RIP Version to 1 (for RIP1) or 2 (for RIP2). The
version number must match the RIP version that other routers in the network use.
3. After you complete your configuration, proceed to the Basic Menu and enter 8. The Save
& Reboot Menu appears. From this menu, save your changes and reboot the router.
•
RIP List. Enter 7 at the Routing Setup Menu. The RIP List Menu appears. This menu
displays routes that the RIP has learned. You’ll see an empty list if RIP is off or if the router
hasn’t learned any routes.
Main Menu=>Basic=>
Save & Reboot
Enter 8 at the Basic Menu. The Save & Reboot Menu appears. This menu allows you to save
the current configuration and reboot the router.
Main Menu=>Basic=>
Erase & Reboot
Enter 9 at the Basic Menu. The Erase & Reboot Menu appears. This menu allows you to erase
the saved configuration and reboot the router.
Main Menu=>
Advanced
Enter 2 at the Main Menu. The Advanced Menu appears. This menu provides the following
options…
file:///P|/T_WRITER/Documentation/Released/900...9003%20(Guiness)%20prac%20template/tquicks.htm (13 of 42) [11/6/2002 8:58:14 AM]