USRobotics U.S. Robotics SureConnect ADSL Ethernet/USB Router - Manual (Page 216)

U.S. Robotics SureConnect ADSL Ethernet/USB Router User Guide
Configuration Description
When you use RFC1483 Routing, the router encapsulates IP packets over the ATM virtual circuit.
This circuit connects the router and the Internet service provider (ISP). In this configuration, routers …
•
Segment LANs to balance traffic within workgroups
•
Filter traffic for security purposes and policy management
• Connect remote offices at the edge of the network
Setup
1. Open the SureConnect Web User Interface (WUI). This example employs the Web User Interface. You can set up
the Network Model with any of the router's three interfaces. The other two interfaces are the Terminal User
Interface (TUI) and the Command-Line Interface (CLI). In any case, succeeding steps are similar.
2. Click ADSL Standard. The ADSL Standard Window opens.
3. Select the ADSL protocol that you’ll use. For most users, Multi Mode is the right choice.
4. Click Apply.
5. Click WAN Setup. The WAN Setup Window opens.
file:///P|/T_WRITER/Documentation/Released/900...%20(Guiness)%20prac%20template/configexamp.htm (21 of 33) [11/6/2002 9:00:35 AM]