USRobotics U.S. Robotics SureConnect ADSL Ethernet/USB Router - Manual (Page 222)

U.S. Robotics SureConnect ADSL Ethernet/USB Router User Guide
14. Click the Routing Setup
tab at the top of the window.
Figure 5
15. Verify your Destination
Network ID setting. (See Figure
5.)
16. Verify your Destination
Subnet Mask setting. (See
Figure 5.)
17. Verify your Next Hop ID
setting. (See Figure 5.)
• CONFIGURATION EXAMPLE
Setting Up RFC1483 Routing with NAT & DHCP
Configuration Description
When you use RFC1483 Routing, the router encapsulates IP packets over the ATM virtual circuit.
This circuit connects the router and the Internet service provider (ISP). In this configuration, routers …
•
Segment LANs to balance traffic within workgroups
•
Filter traffic for security purposes and policy management
• Connect remote offices at the edge of the network
file:///P|/T_WRITER/Documentation/Released/900...%20(Guiness)%20prac%20template/configexamp.htm (27 of 33) [11/6/2002 9:00:35 AM]