VIEWSONIC WPD-100 VS13789 - Manual (Page 21)

ViewSonic WPD-100 15
2-2-1-2 Connect to an Access Point
If the wireless access point you wish to connect is found, you can establish
connection with it by clicking ‘Connect’ button. Instructions will be given as
follow:
1. Click the wireless access point or network device you wish to connect, it will
be highlighted, then click ‘Connect’.
If the access point you selected does not use encryption, you’ll be connected
to this wireless access point within one minute. If the access point you
selected uses encryption, please proceed to step 3.
2. If the wireless access point does not have SSID, you’ll be prompted to input
it now. Please ask the owner of wireless access point for the exact SSID
and input it here, then click ‘OK’ when ready. If the SSID you provided here
is wrong, you’ll not be able to connect to this access point.
3. If the wireless access point uses encryption, you will be prompted to input
its WEP key or WPA preshared key.