VIEWSONIC WPD-100 VS13789 - Manual (Page 46)

ViewSonic WPD-100 40
2: SPAIN
3: FRANCE
4: MKK
5: MKKI (TELEC)
6: ISERAL (Channel 3 to 9)
7: ISERAL (Channel 5 to 13)
Please note that only change the country code if you
are in different country. For example: when
operating this product in US, only channels 1~11 can
be operated. Selection of other channels is not
permitted under FCC regulations.
No forwarding
among wireless
clients Check this box and wireless clients will not be able to
share data with each other.
Hide SSID Check this box and the SSID will not be broadcasted to
the public. Your wireless clients must know the exact
SSID to be able to connect to your computer. This option
is useful to enhance security level.
Allow BW 40 MHz Check this box to allow BW 40MHz capability.
Beacon(ms)
You can define the time interval that a beacon signal
should be send. Default value is 100. Do not modify this
value unless you know what will be affected.
TX Power You can select the wireless output power here. Please
select a proper output power setting according to your
actual needs. You may not need 100% of output power if
other wireless clients are not far from you.
Idle Time Select the idle time for the wireless access point. Default
value is 300. Do not modify this value unless you know
what will be affected.
To save changes, click ‘Apply button. Or you can click ‘Default’ to reset all
values to factory default value.