VIEWSONIC WPD-100 VS13789 - Manual (Page 39)

ViewSonic WPD-100 33
2-6-2 WPS Setup - PIN
If the wireless access point you wish to connect supports PIN, please follow
the following instructions to establish connection to it:
1. The PIN code of your wireless network card is an eight-digit number
located at the upper-right position of the utility. Remember it, and input the
number to your wireless access point as the WPS PIN code (Please refer
to the user manual of your wireless access point for instructions about how
to do this).
2. Click ‘PIN’ button now, and wait for few seconds to one minute. If a wireless
access point with correct PIN code is found, you’ll be connected to that
access point.
3. If not, you may have to click ‘PIN’ for few more times to try again. If you still
can not connect to access point by this way, please make sure the PIN
code you provided to access point is correct.
NOTE: If you experienced problem with the pin code provided
here, you can click ‘Renew’ to get a new pin code.