VIEWSONIC WPD-100 VS13789 - Manual (Page 26)

ViewSonic WPD-100 20
To set authentication / encryption information for the access point. Please click
‘Auth. \ Encry.’ tab:
Here are descriptions of every setup item:
Item Name
Description
Authentication Select the authentication type of the wireless access point or
wireless device you wish to connect. When you’re adding a
profile from an existing access point or wireless device,
authentication type will be selected automatically, and
please do not change it.
Encryption Select the encryption type of the wireless access point or
wireless device you wish to connect. When you’re adding a
profile from an existing access point or wireless device, the
encryption type will be selected automatically, and please do
not modify it.
WPA
Preshared
Key Input WPA preshared key here. If encryption is not enabled,
or you select ‘WEP’ as encryption type, this field will be
disabled and grayed out.
WEP Key You can select key type (Hexadecimal or ASCII) and input
WEP key here. If encryption is not enabled, or you select
‘WPA’ as encryption type, this field will be disabled and
grayed out. You can set up to 4 WEP keys here.
There are two types of WEP key: Hexadecimal and ASCII.
For Hexadecimal key, you can input number 0-9 and
alphabet a-f; for example, ‘001122aabbcc’; For ASCII key,
you can input number 0-9 and alphabet a-z; for example,
mywepkey12345.