VIEWSONIC WPD-100 VS13789 - Manual (Page 48)

ViewSonic WPD-100 42
data will not be encrypted and people with some
networking knowledge will be able to read the data you
transfer with proper tool.
WPA Pre-shared
Key Please input the WPA pre-shared key here. Only clients
with the same pre-shared key you inputted here will be
able to connect to your computer. This setting is only
available when you select one of WPA encryptions.
Group Rekey
Interval You can specify the time interval to re-issue the key to
your wireless clients here. You can click the button ’10
seconds’ or ‘Kpackets’ to change the unit of time interval.
(every 10 seconds or a thousand data packets times the
value you specified in ‘Group Rekey Interval’ field).
Wep Key Please input the WEP encryption key here when you
select ‘WEP’ as encryption type. There are 2 types of
WEP key: Hex (number 0 to 9, and ASCII characters A to
F) and ASCII (all alphanumerical characters plus
symbols). Please select the type of WEP key first, and
then input the WEP key according to the type of WEP
key you selected.
If you want to use WEP 64 bits encryption, please input
10 characters if you select HEX, or input 5 characters if
you select ASCII. If you want to use WEP 128bits
encryption, please input 26 characters if you select HEX,
or input 13 characters if you select ASCII. 128 bits
encryption is safer then 64 bits, but the data transfer
speed will be slightly reduced.
When you finish with setting and want to save changes, click ‘OK’ button, or
click ‘Cancel’ button to discard all changes you made.