VIEWSONIC WPD-100 VS13789 - Manual (Page 47)

ViewSonic WPD-100 41
3-2 Security Setting
This wireless card supports wireless encryption in AP mode, which will encrypt
the data being transferred over the air to enhance data security level. It’s
recommended to enable data encryption unless you wish to open your
computer (and its internet connection) to the public.
When you click ‘Security Setting’ in the utility, the following window will appear:
Here are descriptions of every setup item:
Item Name
Description
Authentication
Type Please select a wireless authentication type you wish to
use. Available options are ‘Open’, ‘Shared’, WPA-PSK’,
‘WPA2-PSK’, and ‘WPA-PSK / WPA2-PSK’. If you want
to disable wireless data encryption, you must select
‘Open’.
Encryption Type Please select an encryption mode. The available options
in this setting item will vary depending on the
authentication type you select. If you select ‘Not Use’,