VIEWSONIC WPD-100 VS13789 - Manual (Page 22)

ViewSonic WPD-100 16
4. Please ask the owner of the wireless access point you want to connect, and
input the correct key here and then click ‘OK’.
If the value you inputted here is wrong, you will not be able to connect to
this wireless access point.
Authentication type will be selected by the authentication type of the
access point automatically, please don’t change it.
However, if you’re connecting to an access point uses 802.1x
authentication, you have to check ‘802.1x’ box and input related information.
Instructions for 802.1x authentication will be given later.
5. If the wireless access point is successfully connected, you’ll see a
symbol appears in front of the name of wireless device.
You can put the mouse cursor over the WPD-100 utility icon, and the brief
information about link status and signal strength of current wireless
connection will be shown as a popup balloon.
You can also click More / Less button (
) to see detailed information
of connected access point: