VIEWSONIC WPD-100 VS13789 - Manual (Page 57)

ViewSonic WPD-100 51
3. You have to input correct security key to connect
an access point with encryption. Please
contact the owner of access point to ask for
correct security key.
4. The access point you wish to connect only
allows network cards with specific MAC
address to establish connection. Please go to
‘About’ tab and write the value of ‘Phy_Addess’
down, then present this value to the owner of
access point so he / she can add the MAC
address of your network card to his / her
access point’s list.
The network is slow /
having problem when
transferring large files 1. Move closer to the place where access point is
located.
2. Disable ‘Tx Burst’ in ‘Advanced’ tab.
3. Enable ‘WMM’ in ‘WMM’ tab if you need to use
multimedia / telephony related applications.
4. Disable ‘WMM – Power Save Enable’ in ‘WMM’
tab.
5. There could be too much people using the
same radio channel. Ask the owner of the
access point to change the channel number.
Please try one or more solutions listed above.