Vision Fitness T9500 - Manual (Page 14)

T9700(TM51D/E) TREADMILLS (for Software Ver. 2.5)
Apply to :
1. VISION T9700/T9600 serise treadmail .
2. 2004 year T9700 serise treadmail.
3. 2004 year for ID
How to enter into the engineering mode?
1. Press & Hold both “ELEVATION UP”
and “SPEED DOWN” at the same time for
3-5 sec. Then, the dot vision display will
show “DGB1J A564” and right display is
show VERSION ”
2. Press the "ELEVATION" or "SPEED" to
selectyou want and press the "SELECT"
key enter.
Display show function interpret
CONFIGURE set the treadmill all parameter
DISPLAY TEST console LED test mode
BURN IN TEST treadmill running test mode
AUTO CAL Auto-calibration mode
SPEED SENSOR speed sensor test mode
RS 232 TEST RS-232 test mode
HR TEST HR test mode
3-1