Vision Fitness T9500 User Manual
Page 17
T9600HRT(COMFORT)/T9600HRT/T9500HRT/T9450HRT/
T9350/T9300 TREADMILLS ( for Software Ver. 5.9)
Apply to :
1. VISION T9300/T9350/T9400/T9450/T9500 serise treadmail.
2. 2004 year T9300/T9350/T9450/T9500/T9600 serise treadmail.
3. 2004 year T9350/T9450/T9500 for ID
How to enter into the engineering mode?
1. Press & Hold both “ELEVATION UP”
and“SPEED DOWN” at the same time for3-5
sec. Then, the dot vision display will show
DGAJ n0nE” .
2. Press the "ELEVATION" or "SPEED" to
select you want and press the "SELECT"
key enter.
Display show
function interpret
ENG1
set the treadmill all parameter
ENG2
console LED test mode
ENG3
treadmill running test mode
ENG4
Auto-calibration mode
ENG5
speed sensor test mode
NONE
come back the user mode
3-4