Vision Fitness T9500 - Manual (Page 38)

Error Messages on the Console
T9700 (TM51D/E) Error code definition
Error Definition
E4 Incline motor parameter over the set
E5 Incline motor not to movement
E6 Incline motor the signal not answer
E7 Speed over the 2.0 mph km/h
Error Message "E4" : Please enter the engineer mode to execute the
AUTO-CAL MODE.
Error Message "E5" : 1. Please check the incline motor cable whether to
inset MCB.
2. Check the console signal whether transmission to
MCB, you can refer to MCB LED UP and DOWN. If
LED not light please check the console cable and
console.
If LED have light please replace the
incline motor.
Error Message " E6" : 1. Please check the incline motor cable whether to
inset MCB.
2. Replace the incline motor
Error Message " E7" : Please enter the engineer mode to execute the
AUTO-CAL MODE.
5-8