Vision Fitness T9500 - Manual (Page 39)

T9600HRT (COMFORT)/T9600HRT/T9500HRT/T9450HRT/T9350/T9300
Error code definition
Error Definition
E4 Incline motor parameter over the set
E5 Incline motor not to movement
E6 Incline motor the signal not answer
TROUBLESHOOTINGS
Error Message " E4" : Please enter the engineer mode to execute the AUTO-CAL
MODE
Error Message " E5" : 1. Please check the incline motor cable whether to inset
MCB.
2. Check the console signal whether transmission to MCB,
you can refer to MCB LED UP and DOWN. If LED not
light please check the console cable and console. If LED
have light please replace the incline motor
Error Message " E6" : 1. Please check the incline motor cable whether to inset
MCB.
2. Replace the incline motor
5-9