Vision Fitness T9500 User Manual
Page 40
Advertising
T9200/T9250 Error code definition
Error code definition
Error
Definition
E2
Incline motor problem
Error Message " E2" :
1.
Please check the incline motor cable whether to inset MCB.
2.
Check the console signal whether transmission to MCB, you can refer to
MCB LED UP and DOWN. If LED not light please check the console
cable and console. If LED have light please replace the incline motor
3.
Please enter the engineer mode to execute the AUTO-CAL MODE
5-10
Advertising
This manual is related to the following products: