Vision Fitness T9500 - Manual (Page 16)

P13 ELV DIR Change the incline altitude 255 0 255
P14 ELV ERRS Change the altitude error switch, 0=OFF, 1=ON 0 0 1
P15 SCROLL set the change display show letter speed 7 1 255
P16 LUBE HRS Accumulate the after one lube to now hour 0 0 0xffff
P17 CLEAN Accumulate the after clean to now distance 0 0 0xffff
P18 BRUSH Accumulate the change motor brush to now distance 0 0 0xffff
P19 EXIT Go away the engineer mode
Remarks:
1. After execute indicated service, please enter the engineer mode to press the
STOP keyfor 3~5 sec to renew of the P16 ,P17 or P18.
2. If you want to the clean accumulate time and distance, please press the
"ELEVATION UP and DOWN" for 5 sec of user mode.
Error code definition
Error Definition
E4 Incline motor parameter over the set
E5 Incline motor not to movement
E6 Incline motor the signal not answer
E7 Speed over the 2.0 mph km/h
3-3