Vision Fitness T9500 - Manual (Page 27)

MCB LED Indication
Note:
the incline is being
commanded up
Note:
the incline is being
commanded down
Light- Indicates the PCB is commanding the
incline motor to move up. If the User is
commanding the incline to increase and this light is not lit,
check cabling, verify proper PCB operation and replace it
if either is defective. If the problem persists, replace the
MCB. If the light is lit but the incline is not moving, check
and verify incline motor and its connection to the board;
check fuse F2. If this problem persists replace MCB.
Light- Indicates the PCB is commanding the
incline motor to move down. If the User is
commanding the incline to decrease and this light is not lit,
check cabling, verify proper PCB operation and replace it
if either is defective. If the problem persists, replace the
MCB. If the light is lit but the incline is not moving, check
and verify incline motor and its connection to the board;
check fuse F2. If this problem persists replace MCB.
UP
DN
4-3