Vision Fitness X6000DA - Manual (Page 11)

7
initial setup
LEVELING YOUR ELLIPTICAL TRAINER
If your Elliptical Trainer wobbles when
you have placed it where you intend
to use it, raise or lower the adjustable
levelers located in several places on
the underside of your Elliptical Trainer:
1) the rear ends of the pedal arm
guide rails,
2) the side stabilizers, and
3) the front foot near the front transport
wheels.
Once you have leveled the Elliptical
Trainer, lock the levelers in place by
tightening the winged lock nuts
against the underside of your Elliptical
Trainer.
POWER SUPPLY (MODELS X6200HRC & X6200HRC/DA)
Your Elliptical Trainer uses a wall-mount external power supply. Use only
the power supply supplied with your Elliptical Trainer. If you misplace this
power supply, please contact your authorized VISION FITNESS dealer
for an original replacement.
Use of the wrong power supply may cause damage to your Elliptical
Trainer.
A L L M O D E L S