Vision Fitness X6000DA - Manual (Page 21)

17
console X 6 0 0 0 D A
CHOOSING TIME AND STARTING
There are two ways to use the timer: Count-Down Mode or Count-Up
Mode.
COUNT-DOWN MODE
Press the SET TIME button to enter
your workout time. When the time
you choose is showing in the
TIME window, start pedaling. The
timer will begin counting down to
zero. When the workout time is
completed, the console will beep
for 5 seconds, then begin
counting-up if you continue
pedaling. To reset, press and hold
the HOLD TO RESET button.
COUNT-UP MODE
To use the timer in count up mode,
simply start pedaling when ‘0:00’
is flashing on the screen.
TURNING SCREEN DISPLAY OFF
The screen display will go off automatically after 5 minutes of non-use.