Vision Fitness X6000DA - Manual (Page 23)

19
console
TURN POWER ON
The On/Off Power switch for your Elliptical Trainer is located on the near
underside of the console (see illustration Page 18). Flip this switch to the
‘ON’ position. You will hear a beep and the console will light up. You
are ready to use your console.
EASY START
Each Program has a ‘default’
Program Level. If a Program Level
is not entered, then the Program
will operate on Program Level 6.
If you choose to use the default
Program Level of 6, the preset
program times and the preset
weight of 150 lbs, you can press
the START•STOP button
immediately after choosing the
Program and the Program will
begin.
X 6 2 0 0 H R C X 6 2 0 0 H R C / D A
CHANGE COURSE DIFFICULTY
Once the Program has begun,
you can vary the level of each
segment by using the UP or
DOWN Arrows. This feature
allows you to adjust select
sections of a course to meet your
present fitness level. If you wish to
vary the Level of the entire
Program, you must stop the
Program you are in and start over.