Western Telematic IPS-15 - Manual (Page 15)

3. Test Switching Functions: When the IPS-15 is powered up,
the Switched AC Outlet will be set in the ON position. To
test On/Off/Reboot functions, proceed as follows:
a) Reboot Outlet: Click on the "Boot" radio button for Plug
one. Next, click the "Apply" button. The IPS will display
a screen indicating that the reboot operation is in
progress, then return to the Plug Status Screen. Plug 1
should now be in the "On" position.
b) Switch Outlet Off: Click the "Off" radio button for Plug
one. Next, click the "Apply" button; the IPS will display
a screen indicating that the switch operation is in
progress, then return to the Plug Status Screen. Note that
the Status Indicator for Plug One now indicates that the
plug is switched "Off."
c) Switch Outlet On: Click the "On" radio button for Plug
One. Next, click the "Apply" button, the IPS will display
a screen indicating that the switch operation is in
progress, then return to the Plug Status Screen. Note that
the Status Indicator for Plug One now shows that the plug
is switched "On."
3-5
Section 3: Quick Start
Figure 3.2: The IPS Plug Status Screen, Web Interface