Western Telematic IPS-15 - Manual (Page 28)

The General Parameters Menu allows the following parameters to be
defined. Please note that, except where indicated, all parameters are
available via both the Web Browser Interface and the Text Interface.
· System Password: The IPS will display a password prompt
when you attempt to access the command mode. When the
System Password is entered at log on, the System Mode will be
active, allowing access to both switching command functions and
configuration menus. (16 Characters, Default = undefined.)
Notes:
· If the System Password is not defined, then the IPS
will always start up in System Mode, and
configuration functions will then be available to
anyone who accesses the Command Mode.
· When defining passwords via Web Browser Interface,
you must re-key the desired password in the "Confirm
Password" field. When defining passwords via the
Text Interface, the submenu will also ask you for
confirmation.
· User Password: The User Password allows access to all
On/Off/Boot command functions, but does not allow access to
configuration menus. (16 Characters, Default = undefined.)
5-6
IPS Internet Power Switch; User's Guide
Figure 5.3: General Parameters Menu - Web Browser Interface