Whirlpool GHW9100L - Manual (Page 16)

2 - 8
10. When the washer is level, use a
9/16” open-end wrench to securely
tighten all four (4) feet locknuts
against the pedestal.
(Fig. 2-7) The
locknuts must be tightened.
Fig. 2-7
11. Pull both drawer slides out and reas-
semble the drawer to the drawer slides
with the two (2) Phillips head screws.
(Fig. 2-8) Use of the two (2) dividers is
optional. Close the drawer.
Fig. 2-8