Whirlpool GHW9100L - Manual (Page 57)

6 - 13
Pump
• Lf +15s - The pump will turn on and drain the tub to lowest setting, (Suds Detect), and then run for
an additional 15 seconds.
Options
• 2nd rinse - If this option is selected by the consumer, this line indicates when it will occur
during the main cycle and it’s duration.
• rinse hold - If this option is selected by the consumer, this line will indicate when it will occur
during the main cycle. Pressing Rinse Hold again will allow the main cycle to continue.