Whirlpool GHW9100L - Manual (Page 21)

3 - 5
Soak
Use the Soak cycle to remove small spots of set-in stains on fabrics. This cycle provides a soak time
with warm or cold water followed by drain. Extra water, a short tumbling phase for equal distribution of
the laundry, and a soaking time without basket movement improve the removal of set-in stains. Drain
without spin assures gentle treatment even for delicate articles.
Rinse/Spin
Use the Rinse/Spin cycle to get a rinse and spin only. This cycle combines fast speed tumbling and
extra high speed spin. If desired, you can reduce the spin speed by selecting the speed you want from
the SPIN SPEED modifier. A Rinse/Spin cycle is useful for loads that need rinsing only or for adding
fabric softener to a load.
Drain/Spin
Use the Drain/Spin cycle to drain your washer or to drain and spin your wash load. The spin speed is
preset to extra high. If desired, you can reduce the spin speed by selecting the speed you want from
the SPIN SPEED modifier.
NOTE: Loads of synthetics, delicate fabrics, handwashables, and woolens should be drained with no
spin or low spin speed to avoid fabric stress.
PRESET CYCLE SETTINGS
Cycle
Sanitary
Whitest
Whites
Heavy
Duty
Normal/
Casual
Quick
Wash
Delicate
Silk
Wool
Hand
Washables
Soil level
(cycle time)
More
(120 min.)
More
(70 min.)
More
(90 min.)
Normal
(45 min.)
Less
(30 min.)
Normal
(35 min.)
Normal
(30 min.)
Normal
(35 min.)
Normal
(35 min.)
Water Temp
Extra Hot/Cold
Hot/Cold
Hot/Cold
Warm/Cold
Warm/Cold
Warm/Cold
Cold/Cold
Cold/Cold
Cold/Cold
Spin Speed
Extra High
Extra High
Extra High
High
Extra High
Medium
No Spin
Medium
Extra Low
Table 3-1