ZyXEL Communications ZyXEL Dimension ES-3124 - Manual (Page 107)

Dimension ES-3124 Ethernet Switch
Bandwidth Control 11-3
Table 11-1 Bandwidth Control
LABEL DESCRIPTION
Commit Rate Specify the guaranteed bandwidth allowed in kilobits per second (Kbps) for the incoming traffic
flow on a port. The commit rate should be less than the peak rate. The sum of commit rates
cannot be greater than or equal to the uplink bandwidth.
Peak Rate Specify the maximum bandwidth allowed in kilobits per second (Kbps) for the incoming traffic
flow on a port.
Egress Rate Type the maximum bandwidth allowed in megabits per second (Mbps) for traffic going out of this
port.
Apply Click Apply to save your changes back to the switch.
Cancel Click Cancel to reset the fields to your previous configuration.