ZyXEL Communications ZyXEL Dimension ES-3124 - Manual (Page 219)

Dimension ES-3124 Ethernet Switch
Introducing the Commands 30-11
Table 30-3 Command Summary: Configure Mode
COMMAND DESCRIPTION
logout Exits from the CLI.
history Displays a list of previously
command(s) that you have
executed.
exit Exits from the CLI.
mode zynos Changes the CLI mode to the
ZyNOS format.
password Change the password for Enable
mode.
no ip Sets the management IP address
to the default value.
route <ip> <mask>
inactive
Enables a specified IP static route.
route <ip> <mask> Removes a specified IP static
route.
igmp-filtering Clears the IGMP filtering settings
on the switch.
profile <name> Deletes the IGMP filtering profile.
profile <name>
start-address <ip>
end-address <ip>
Deletes a rule in the IGMP filtering
profile.
igmp-snooping Disables IGMP snooping.
mac-forward mac <mac-addr> vlan
<vlan-id> interface
<interface-id>
inactive
Enables the specified MAC
address, belonging to a VLAN
group (if any) forwarded through
an interface(s).
mac <mac-addr> vlan
<vlan-id> interface
<interface-id>
Removes the specified MAC
forwarding entry, belonging to a
VLAN group (if any) forwarded
through an interface(s).
mac-filter mac <mac-addr> vlan
<vlan-id> inactive
Enables the specified MAC-filter
rule.
mac <mac-addr> vlan
<vlan-id>
Disables the specified MAC filter
rule.
mirror-port Disables port mirroring on the
switch.
lacp Disables the link aggregation
control protocol (dynamic trunking)
on the switch.
trunk <T1|T2|T3|T4|T5|T6>
lacp
Disables LACP in the specified
trunk group.