ZyXEL Communications ZyXEL Dimension ES-3124 - Manual (Page 228)

Dimension ES-3124 Ethernet Switch
30-20 Introducing the Commands
Table 30-3 Command Summary: Configure Mode
COMMAND DESCRIPTION
trap-destination
<ip>
Sets the IP addresses of up to four
stations to send your SNMP traps
to.
logins username <name>
password <pwd> Configures up to four read-only
login accounts.
service-control icmp Allows ICMP access to the switch
such as pinging and tracerouting.
snmp Allows SNMP management.
http <socket-
number> <timeout>
Allows HTTP access on the
specified service port and defines
the timeout period.
telnet <socket-
number>
Allows Telnet access on the
specified service port.
ftp <socket-number> Allows FTP access on the
specified service port.
ssh <socket-number> Allows SSH access on the
specified service port.
https <socket-
number>
Allows HTTPS access on the
specified service port.
remote-
management <index> Enables a specified secured client
set.
<index> start-addr
<ip> end-addr <ip>
service <[telnet]
[ftp][http][icmp]
[snmp][ssh][https]>
Specifies a group of trusted
computer(s) from which an
administrator may use a service to
manage the switch.
admin-password <pw-string>
<confirm-string>
Changes the administrator
password.
vlan-stacking Enables VLAN stacking on the
switch.
<SPTPID> Sets the SP TPID (Service
Provider Tag Protocol Identifier).
default-
management
<in-band|out-of-
band>
Specifies through which traffic flow
the switch is to send packets.
ssh known-hosts <host-
ip> <1024|ssh-
rsa|ssh-dsa> <key> Adds a remote host to which the
switch can access using SSH
service.
https cert-regeneration
<rsa|dsa>
Re-generates a certificate.
timeout <0-65535> Sets the HTTPS timeout period.
multi-login Enables multi-login.