Speed-duplex, 14 speed-duplex – ZyXEL Communications ZyXEL Dimension ES-3124 User Manual
Page 252

Dimension ES-3124 Ethernet Switch
31-16
Command Examples
Figure 31-32 name Command Example
31.8.14 speed-duplex
Syntax:
speed-duplex <auto|10-half|10-full|100-half|100-full|1000-full>
where
<auto|10-
half|10-
full|100-
half|100-
full|1000-
full>
Sets the duplex mode (half, full) and speed (10/100/1000 Mbps) of the
connection on the interface. Selecting auto (auto-negotiation) makes one port
able to negotiate with a peer automatically to obtain the connection speed
and duplex mode that both ends support.
An example is shown next.
Enable ports one, three, four and five for configuration.
Set the speed to 10 Mbps in half duplex mode.
Figure 31-33 speed-duplex Command Example
ras(config)# interface port-channel 1,3-5
ras(config-interface)# speed-duplex 10-half
ras(config)# interface port-channel 1,3-5
ras(config-interface)# name Test