ZyXEL Communications ZyXEL Dimension ES-3124 - Manual (Page 222)

Dimension ES-3124 Ethernet Switch
30-14 Introducing the Commands
Table 30-3 Command Summary: Configure Mode
COMMAND DESCRIPTION
multi-login Disables another administrator
from logging into Telnet or the CLI.
cluster Disables cluster management on
the switch.
member <mac-
address>
Removes the cluster member.
mvr <vlan-id> Disables MVR on the switch.
wfq fe-spq Sets the switch to use WFQ to
service all queues for the
10/100Mbps Ethernet port.
vlan <1-4094> Enters the VLAN configuration
mode. See Section 30.9.4 for more
information.
vlan-type <802.1q|port-based> Specifies the VLAN type.
igmp-snooping Enables IGMP snooping.
unknown-multicast-
frame
<drop|flooding>
Sets how to treat traffic from
unknown multicast group.
igmp-filtering Enables IGMP filtering on the
switch.
profile <name>
start-address <ip>
end-address <ip>
Sets the range of multicast
address(es) in a profile.
interface port-channel <port-
list>
Enables a port or a list of ports for
configuration. See Section 30.9.5
for more details.
spq Sets the queuing method to SPQ
(Strictly Priority Queuing).
wfq Sets the queuing method to WFQ
(Weighted Fair Queuing).
fe-spq <Q0-Q7> Sets the switch to use SPQ to
service the subsequent queue(s)
after and including the specified
queue for the 10/100 Mbps
Ethernet ports.
ip route <ip> <mask>
<next-hop-ip> Creates a static route.
<ip> <mask>
<next-hop-ip>
[metric <metric>]
[name <name>]
[inactive]
Sets the metric of a static route or
deactivates a static route.