ZyXEL Communications ZyXEL Dimension ES-3124 - Manual (Page 233)

Dimension ES-3124 Ethernet Switch
Introducing the Commands 30-25
Table 30-5 Command Summary: Interface
COMMAND DESCRIPTION
dir <ingress|egress|both> Enables port mirroring for
incoming, outgoing or both
incoming and outgoing traffic.
Port mirroring copies traffic from
one or all ports to another or all
ports for external analysis.
speed-duplex <auto|10-half|10-full|100-
half|100-full|1000-full>
Sets the duplex mode (half, full)
and speed (10/100/1000 Mbps)
of the connection on the
interface. Selecting auto (auto-
negotiation) makes one port able
to negotiate with a peer
automatically to obtain the
connection speed and duplex
mode that both ends support.
bpdu-control <peer|tunnel|discard|network> Sets how Bridge Protocol Data
Units (BPDUs) are used in STP
port states.
no egress set <port-list> Disables the outgoing traffic port
list for a port-based VLAN.
igmp-immediate-leave Disables IGMP immediate leave
on the port.
igmp-filtering profile Disables IGMP filtering on the
port.
igmp-group-limited Disables IGMP group limitation.
ingress-check Incoming traffic is not checked
for VLAN tags.
gvrp Disables GVRP on the switch.
flow-control Disables flow control on the
switch.
vlan-trunking Disables VLAN trunking on the
switch.
mirror Disables port mirroring on the
switch.
bandwidth-limit Disables bandwidth limit on the
switch.
broadcast-limit Disables broadcast storm control
limit on the switch.
multicast-limit Disables multicast limit on the
switch.
dlf-limit Disables destination lookup
failure (DLF) on the switch.
inactive
Enables the specified interface
on the switch.