ZyXEL Communications ZyXEL Dimension ES-3124 User Manual
Page 227
Dimension ES-3124 Ethernet Switch
Introducing the Commands
30-19
Table 30-3 Command Summary: Configure Mode
COMMAND DESCRIPTION
Hostname
<name_string>
Sets the switch’s name for
identification purposes.
Spaces are allowed in the CLI
only when the system name
is in “quotation marks”.
Eg: <config># hostname
“ES-3124 a”
time <Hour:Min:Sec>
Sets the time in hour, minute and
second format.
date
<month/day/year>
Sets the date in year, month and
day format.
timezone
<-
1200|...|1200>
Selects the time difference
between UTC (formerly known as
GMT) and your time zone.
timesync <daytime|time|ntp>
Sets the time server protocol.
server
<ip>
Sets the IP address of your time
server.
loginPrecedence <LocalOnly |
LocalRADIUS |
RADIUSOnly>
Select which database the switch
should use (first) to authenticate a
user.
igmp-snooping
Enables IGMP snooping.
bcp-
transparency
Enables Bridge Control Protocol
Transparency.
queue level
<0-7>
priority <0-7>
Sets the priority level-to-physical
queue mapping.
storm-control
Enables broadcast storm control
on the switch.
bandwidth-
control
Enables bandwidth control.
mac-aging-time <10-3000>
Sets learned MAC aging time.
snmp-server [contact
<system
contact>] [location
<system location>]
Sets the geographic location and
the name of the person in charge
of this switch.
get-community
<property>
Sets the get community.
set-community
<property>
Sets the set community.
trap-community
<property>
Sets the trap community.