ZyXEL Communications IES-612-51A User Manual
Page 259
Chapter 41 Commands Summary
IES-612-51A User’s Guide
259
snmp getcommunity
<community>
Sets the SNMP GetRequest
community.
H/H
snmp setcommunity
<community>
Sets the SNMP SetRequest
community.
H/H
snmp trapcommunity
<community>
Sets the SNMP Trap community.
H/H
snmp trusthost
<ip>
Sets the SNMP trusted host. Set
0.0.0.0 to trust all hosts.
H/H
snmp trapdst set
<index> <ip>
[<port>]
Sets the SNMP trap server and
listening port. Set 0.0.0.0 to not
send any SNMP traps.
H/H
snmp trapdst del
<index>
Deletes the SNMP trap server
H/H
server show
Displays the device’s service
status and port numbers.
M/L
server enable
<telnet|ftp|web|ic
mp>
Turns on a service.
H/H
server disable
<telnet|ftp|web|ic
mp>
Turns off a service.
H/H
server port
<telnet|ftp|web>
<port>
Sets a port for a service.
H/H
client show
Displays the device’s secured
client settings.
M/L
client enable
<index>
Turns on a secure client.
H/H
client disable
<index>
Turns off a secure client.
H/H
client set
<index> <start ip>
<end ip> [[telnet]
[ftp] [web]
[icmp]]
Sets a secured client set: a range
of IP addresses from which you
can manage the device and the
protocols that can be used.
H/H
syslog show
Displays the syslog settings.
M/L
syslog enable
Turns on the syslog logging.
H/H
syslog disable
Turns off the syslog logging.
H/H
syslog server
<ip>
Sets the IP address of the syslog
server.
H/H
x
stdio show
Displays Current Stdio Timeout.
L/L
stdio set
<minute|0:no
timeout>
Sets Current Stdio Timeout.
H/H
time show
Displays the system’s current
time.
L/L
time set
<hh> [<mm> [ss]]
Sets the system’s time.
H/H
date show
Displays the system’s current
date.
L/L
date set
<yyyy mm dd>
Sets the system’s date.
H/H
timeserver show
Displays the system’s time server.
M/L
timeserver set
<none>
Sets the system to not use a time
server.
H/H
Table 88 Commands (continued)
CLASS
COMMAND
PARAMETERS
DESCRIPTION
P