ZyXEL Communications IES-612-51A - Manual (Page 261)

Chapter 41 Commands Summary
IES-612-51A User’s Guide
261
user show Displays the authentication mode,
RADIUS server settings and user
info. M/L
user auth <local|radius|land
r>
Set authentication method. H/H
user server <ip> <port>
<secret>
[high|middle|low|d
eny]
Set remote authentication server
IP address and secret H/H
adsl
show [portlist] Displays the ADSL settings. L/L
enable <portlist> Turns on the specified ADSL
ports. M/H
disable <portlist> Turns off the specified ADSL
ports. M/H
profile show [profile] Displays profile contents. L/L
profile set <profile> <fast|
interleave [=<up
delay>,<down
delay>]> <up max
rate> <down max
rate> [<up target
margin> <up min
margin> <up max
margin> <up min
rate> <down target
margin> <down min
margin> <down max
margin> <down min
rate> <up down-
shift margin> <up
up-shift margin>
<down down-shift
margin> <down up-
shift margin>]
Creates an adsl line profile. H/H
profile delete <profile> Removes an ADSL profile. H/H
profile map <portlist>
<profile>
<glite|gdmt|t1413|
auto|adsl2|adsl2+>
Assigns a specific profile to a
port(s) and sets the port’s ADSL
mode. H/H
name <portlist> <name> Sets the name of a port(s). M/L
tel <portlist> <tel> Records an ADSL port(s)
subscriber’s telephone number. M/L
loopback <portlist> <f5>
<vpi> <vci>
Performs an OAMF5 loopback
test. H/H
vcprofile show [vcprofile] Shows a virtual channel profile’s
contents. L/L
Table 88 Commands (continued)
CLASS COMMAND PARAMETERS DESCRIPTION P