ZyXEL Communications IES-612-51A - Manual (Page 324)

Chapter 47 IGMP Commands
IES-612-51A User’s Guide
324
47.8.2 Multicast VLAN Delete Command
Syntax:
ras> switch igmpsnoop mvlan delete <vlanlist>
where
This command removes the specified multicast VLAN configuration(s).
47.8.3 Multicast VLAN Disable Command
Syntax:
ras> switch igmpsnoop mvlan disable <vid>
where
This command deactivates the specified multicast VLAN. The following example disables
multicast VLAN 12.
Figure 188 Multicast VLAN Disable Command Example
47.8.4 Multicast VLAN Enable Command
Syntax:
ras> switch igmpsnoop mvlan enable <vid>
where
This command activates the specified multicast VLAN.
47.8.5 Multicast VLAN Show Command
Syntax:
ras> switch igmpsnoop mvlan show <vlanlist>
<vlanlist> = You can specify a single VLAN: <1>, all VLAN: <*>, a list
of VLAN: <1,3>, you can also include a range of VLAN:
<1,5,6~10>.
<vid> = The multicast VLAN ID [1 – 4094].
ras> switch igmpsnoop mvlan disable 12
<vid> = The multicast VLAN ID [1 – 4094].