ZyXEL Communications IES-612-51A - Manual (Page 275)

Chapter 41 Commands Summary
IES-612-51A User’s Guide
275
adsl lineperf <portlist> Displays the performance
statistics of the specified ADSL
port. M/L
adsl linerate <portlist> Displays the line rate. M/L
adsl 15mperf <portlist> [count
<0..96>]
Displays line performance
statistics for the current and
previous 15-minute periods. M/L
adsl 1dayperf <portlist> Displays line performance
statistics for the current and
previous 24 hours. M/L
igmpsnoop info [clear] Display protocol packets counters
& number of learned groups L/L
igmpsnoop group Display IGMP learned group
member information L/L
igmpsnoop port
info
Display received protocol packets
counters, number of joined
groups. L/L
igmpsnoop port
group
<portlist> Display joined groups in this port M/L
dhcp counter [<portlist>
[clear]]
Display DHCP statistics for a port L/L
dhcp snoop <portlist> Display snooping L/L
rmon stats|history
enet1|enet2
Display uplink/subtending link
RMON information M/L
rstp Displays RSTP information M/L
vlan [vlanlist] Displays current VLANs. M/L
mac Displays current MAC address
forwarding table. M/L
port <portlist> [<vpi>
<vci>] [clear]
This command displays and/or
erases port statistics. M/L
dot1x [portlist] Shows the dot1x status of the
specified port. M/L
enet Displays Ethernet port settings
and statistics. M/L
ip Displays a Management port’s
status and performance data. M/~
config
show <sys|sw|adsl|ip|st
at|all> [nopause]
Displays the device’s
configuration. M/L
save Saves the current configuration. H/H
restore Reloads the factory default
configuration. H/H
exit Ends the console or telnet
session. L/L
Table 88 Commands (continued)
CLASS COMMAND PARAMETERS DESCRIPTION P