ZyXEL Communications IES-612-51A - Manual (Page 264)

Chapter 41 Commands Summary
IES-612-51A User’s Guide
264
linediag setld <port number> Sets the specified port to line
diagnostic mode. H/H
linediag getld <port number> Displays the specified port line
diagnostics. L/L
linediag
getld992_3
<port number> Displays the specified port line
diagnostics. L/L
linediag setselt <port number> Sets the specified port to line
SELT. H/H
linediag getselt <port number> Displays the specified port line
SELT. L/L
linediag toneDiag <port number> Displays the specified port line
diagnostics. L/L
alarmprofile show [profile] Displays alarm profiles and their
settings. L/L
alarmprofile set <profile> [<atuc
lofs> <atur lofs>
<atuc loss> <atur
loss> <atuc olls>
<atuc lprs> <atur
lprs> <atuc ess>
<atur ess> <atuc
fast rateup> <atur
fast rateup> <atuc
interleave rateup>
<atur interleave
rateup> <atuc fast
ratedown> <atur
fast ratedown>
<atuc interleave
ratedown> <atur
interleave
ratedown> <init
fail enable> <atuc
fail fast> <atuc
ses> <atur ses>
<atuc uas> <atur
uas>]
Configures an alarm profile. H/H
alarmprofile
delete
<profile> Removes an alarm profile. H/H
alarmprofile map <portlist>
<profile>
Maps specified ADSL ports to an
alarm profile. H/H
alarmprofile
showmap
[port number] Displays alarm profile to ADSL
port mapping. L/L
alarmprofile
showport
<port number> Displays which alarm profile
parameters are mapped to an
ADSL port. L/~
usnompsd <port number>
[<max nominal
psd>]
Display or set Maximum nominal
transmit PSD in the US direction H/H
Table 88 Commands (continued)
CLASS COMMAND PARAMETERS DESCRIPTION P