ZyXEL Communications IES-612-51A User Manual
Page 273
Chapter 41 Commands Summary
IES-612-51A User’s Guide
273
dot1x disable
Turn off dot1x.
H/H
dot1x auth
<profile|radius>
Set authentication method to
profile or radius.
H/H
dot1x port enable
<portlist>
Turn on dot1x on port.
H/H
dot1x port disable
<portlist>
Turn off dot1x on port.
H/H
dot1x port control
<portlist>
<auto|auth|unauth>
Set port authentication status.
H/H
dot1x port reauth
<portlist>
<on|off>
Turn on or turn off port to do
reauthentication.
H/H
dot1x port period
<portlist>
<period>
Set port reauth period.
H/H
dot1x radius show
Display radius server settings.
M/L
dot1x radius ip
<ip>
Set Radius server IP.
H/H
dot1x radius port
<port>
Set Radius server port.
H/H
dot1x radius
secret
<secret>
Set Radius server secret.
H/H
dot1x profile show
Display accounts for profile mode.
M/L
dot1x profile set
<name> <password>
Set account and password for
profile mode.
H/H
dot1x profile
delete
<name>
Remove account for profile mode.
H/H
enet show
Displays the Ethernet port
settings.
M/L
enet speed
<portlist>
<10copper|100coppe
r|auto>
Sets the Ethernet port(s)
connection speed.
H/H
enet name
<portlist> <name>
Sets the Ethernet port(s) name.
H/H
enet enable
<portlist>
Turns on the specified Ethernet
port(s).
H/H
enet disable
<portlist>
Turns off the specified Ethernet
port(s).
H/H
enet reset
<portlist>
Reset the ENET interface
H/H
enet length show
Manually set the ENET cable
length, this is used for very rare
cases when connect to some
ENET PHY, in most cases, should
set to auto(system default)
M/~
enet length set
<portlist>
auto|<length>
Display the ENET cable length
setting, <length>: 0-15, in units of
10 m
H/~
smcast show
Display all MAC addresses joined
to ADSL ports.
M/L
Table 88 Commands (continued)
CLASS
COMMAND
PARAMETERS
DESCRIPTION
P