ZyXEL Communications IES-612-51A User Manual
Page 274
Chapter 41 Commands Summary
IES-612-51A User’s Guide
274
smcast set
<adsl_port> <mac>
<join|leave>
Use join/leave to add/ remove
multicast MAC addresses on
specified ADSL ports, a range of
ADSL ports or all ADSL ports.
MAC example: 01005E010203
H/H
smcast delete
<mac>
Removes a static multicast filter
entry by deleting the associated
MAC address.
H/H
isolation show
Displays the subscriber isolation
feature’s current setting.
M/L
isolation enable
Turns the subscriber isolation
feature on.
H/H
isolation disable
Turns the subscriber isolation
feature off.
H/H
isolation
daisychain
Set switch mode to daisychain
mode
H/H
isolation
standalone
Set switch mode to standalone
mode
H/H
ip
show
[inband|outband]
Displays the Management IP
address settings.
M/L
arp show
Displays the device’s IP Address
Resolution Protocol(ARP) table.
M/L
arp flush
Clears the device’s IP Address
Resolution Protocol(ARP) table.
H/H
set
<ip>[/netmask]
Sets the Management IP address
and subnet mask.
H/H
gateway
<gateway ip>
Sets the IP address of the
device’s default gateway.
H/H
route show
Displays the routing table.
M/L
route set
<dst ip>[/netmask]
<gateway ip>
[metric] <name>
Adds a routing table entry.
H/H
route set
default <gateway
ip> <metric>
Sets the device’s default route.
H/H
route delete
<dst ip>[/netmask]
Removes a routing table entry.
H/H
route flush
Clears the routing table.
H/~
ping
<ip> [count]
Pings a remote host.
M/L
statistics
monitor
Displays hardware monitor status.
M/L
adsl show
[portlist]
Displays ADSL port connection
status.
M/L
adsl linedata
<portlist>
Displays the line data load per
symbol (tone).
M/L
adsl lineinfo
<portlist>
Displays the info of the specified
ADSL ports.
M/L
Table 88 Commands (continued)
CLASS
COMMAND
PARAMETERS
DESCRIPTION
P