Zoom 8080 - Manual (Page 23)

During editing, you can temporarily revert to the original condition of the patch, to quickly evaluate the changes
you have made. This is called the Compare function.
■ 22
Advanced
Operation
Comparing an edited patch with its original condition
In Edit mode, press
the . The indication "CMPR" appears on
the display and the edited
parameters revert to their original
settings.
GROUP/COMPARE key
1
Press the
again.
The parameters change to the
edited status. GROUP/COMPARE key
2
CONTROL
PEDAL
CONTROL
PEDAL
CONTROL
SWITCH
DECREASE
–(TAP/HOLD)
INCREASE
USER
FUNCTION BANK
MAX
CONTROL SWITCH INDICATOR
1/2
MIN
BLINK
(DLY:TAP)
COMP EFF1 DIST EQ EFF2 EFF3 DLY REV TOTAL
STORE (EXECUTE) EDIT
EXIT UTILITY PAGE TYPE – +
PRESENCE OUTPUT
3 4
1 2
MAX MIN
MAX MIN MAX MIN
MAX MIN
GROUP COMPARE
FINE TUNE
Super ADVANCED GUITAR EFFECTS PROCESSOR
1, 2
Display
GROUP
COMPARE
GROUP/COMPARE key
VDSP DST=15
é LVL=15 ZNR=off
VDSP DST=16
CMPR LVL=15 ZNR=off
When an effect module is switched off or on, the indication " é " appears on the display. This indicates that the currently
selected patch has been changed (edited).
HINT HINT