Zoom 8080 User Manual
Page 40
39
■
Advanced
Operation
Press the
two
times.
The Utility mode settings are stored
and the unit returns to the Play
mode.
STORE/EXECUTE key
4
Press the
while
playing the instrument
in Play mode.
The preset bank number or patch
number will be called up.
USER FUNCTION switch
5
If Utility mode settings are not stored, they will remain active only until the unit is next turned off. When turned on again,
the unit reverts to the previous settings. If you wish to keep changes you have made, do not forget to press the
STORE/EXECUTE key twice to perform the store process. Note that any edited patch will also be stored at this time.
NO
✎
If "PATCH" was
selected, use
3 to set
the desired patch
number in the "PAT="
item.
Data entry knob
3'
USER FUNCTION= PATCH
3 PAT=U09
01 8080LEAD LVL=100
AMP ¡VOL ™OFF ßHLD