Zoom 8080 - Manual (Page 4)

In this manual, symbols are used to highlight warnings and
cautions for you to read so that accidents can be prevented.
The meanings of these symbols are as follows:
This symbol indicates explanations
about extremely dangerous matters. If
users ignore this symbol and handle
the device the wrong way, serious
injury or death could result.
This symbol indicates explanations
about dangerous matters. If users
ignore this symbol and handle the
device the wrong way, bodily injury
and damage to the equipment could
result.
Please observe the following safety tips and precautions
to ensure hazard-free use of the 8080.
• Power requirements
The 8080 is powered by the supplied AC adapter . To
prevent malfunction and safety hazards, Do not use any
other kind of AC adapter.
When using the 8080 in an area with a different line
voltage, please consult your local ZOOM distributor
about acquiring a proper AC adapter.
• Environment
Avoid using your 8080 in environments where it will be
exposed to:
• Extreme temperature
• High humidity or moisture
• Excessive dust or sand
• Excessive vibration or shock
• Handling
Since the 8080 is a precision electronic device, avoid
applying excessive force to the switches and buttons.
Also take care not to drop the unit, and do not subject it
to shock or excessive pressure.
• Alterations
Never open the case of the 8080 or attempt to modify the
product in any way since this can result in damage to the
unit.
• Connecting cables and input and
output jacks
You should always turn off the power to the 8080 and all
other equipment before connecting or disconnecting any
cables. Also make sure to disconnect all cables and the
AC adapter before moving the 8080.
• Electrical interference
For safety considerations, the 8080 has been designed to
provide maximum protection against the emission of
electromagnetic radiation from inside the device, and from
external interference.However, equipment that is very
susceptible to interference or that emits powerful
electromagnetic waves should not be placed near the 8080, as
the possibility of interference cannot be ruled out entirely.
Whatever the type of digital control device, the 8080 included,
electromagnetic damage can cause malfunctioning, and can
corrupt or destroy data. Since this is an ever-present danger,
thorough care should be taken to minimize the risk of damage.
• Cleaning
Use a soft, dry cloth to clean the 8080. If necessary, slightly
moisten the cloth. Do not use abrasive cleanser, wax, or
solvents (such as paint thinner or cleaning alcohol), since these
may dull the finish or damage the surface.
Please keep this manual in a convenient place for future
reference.
3 ■
USAGE AND SAFETY PRECAUTIONS
Usage Precautions Safety Precautions
Warning
Caution
Warning
Caution
Caution
Caution
Caution