ZyXEL Communications Prestige 650 - Manual (Page 157)

Prestige 650 ADSL Router
Firmware and Configuration File Maintenance 11-7
Step 3. Run the HyperTerminal program by clicking Transfer, then Receive File as shown in the
following screen.
Figure 11-5 Backup Configuration Example
Step 4. After a successful backup you will see the following screen. Press any key to return to the SMT
menu.
Figure 11-6 Successful Backup Confirmation Screen
11.3 Restore Configuration
This section shows you how to restore a previously saved configuration. Note that this function erases the
current configuration before restoring a previous back up configuration; please do not attempt to restore
unless you have a backup configuration file stored on disk.
FTP is the preferred method for restoring your current computer configuration to your Prestige since FTP is
faster. Please note that you must wait for the system to automatically restart after the file transfer is
complete.
** Backup Configuration completed. OK.
### Hit any key to continue.###
Type a location for storing the
configuration file or click
Browse to look for one.
Choose the Xmodem protocol.
Then click Receive.