ZyXEL Communications Prestige 650 - Manual (Page 95)

Prestige 650 ADSL Router
NAT 7-9
The Server Set is a list of LAN side servers mapped to external ports. To use this set (one set for the
Prestige 10), a server rule must be set up inside the NAT Address Mapping set. Please see section 7.4 for
further information on these menus. To configure NAT, enter 15 from the main menu to bring up the
following screen.
Figure 7-5 Menu 15 — NAT Setup
7.3.1 Address Mapping Sets
Enter 1 to bring up Menu 15.1 — Address Mapping Sets.
Figure 7-6 Menu 15.1 — Address Mapping Sets
SUA Address Mapping Set
Enter 255 to display the next screen (see also section 7.2.1). The fields in this menu cannot be changed.
Menu 15 — NAT Setup
1. Address Mapping Sets
2. NAT Server Sets
Enter Menu Selection Number:
Menu 15.1 - Address Mapping Sets
1.
2.
3.
4.
5.
6.
7.
8.
255. (read only)
Enter Menu Selection Number:
Enter Menu Selection Number: