ZyXEL Communications Prestige 650 - Manual (Page 194)

Prestige 650 ADSL Router
Troubleshooting 16-3
16.5 Problems with the Password
Table 16-5 Troubleshooting the Password
PROBLEM CORRECTIVE ACTION
I cannot access the
Prestige. The Password and Username fields are case-sensitive. Make sure that you enter the
correct password and username using the proper casing.
Use the RESET button to restore the factory default configuration file. This will restore
all of the factory defaults including the password. Refer to the RESET button section
in the User's Guide for details.
16.6 Problems with Telnet
Table 16-6 Troubleshooting Telnet
PROBLEM CORRECTIVE ACTION
Refer to the Remote Management Limitations section for scenarios
when remote management may not be possible.
When NAT is enabled:
Use the Prestige’s WAN IP address when configuring from
the WAN.
Use the Prestige’s LAN IP address when configuring from
the LAN.
Refer to the Problems with the LAN Interface section for instructions
on checking your LAN connection.
I cannot access the Prestige from
the LAN or WAN.
Refer to the Problems with the WAN Interface section for
instructions on checking your WAN connection.