ZyXEL Communications Prestige 650 - Manual (Page 99)

Prestige 650 ADSL Router
NAT 7-13
Figure 7-9 Menu 15.1.1.1 — Editing/Configuring an Individual Rule in a Set
Table 7-6 Menu 15.1.1.1 — Editing/Configuring an Individual Rule in a Set
FIELD DESCRIPTION EXAMPLE
Type Press [SPACE BAR] and then [ENTER] to select from a total
of five types. These are the mapping types discussed in
Table 7-2. Server allows you to specify multiple servers of
different types behind NAT to this computer. See section
7.5.3 for an example. One-to-One
Local IP Only local IP fields are N/A for server; Global IP fields MUST
be set for Server.
Start This is the starting local IP address (ILA). 0.0.0.0
End This is the ending local IP address (ILA). If the rule is for all
local IPs, then put the Start IP as 0.0.0.0 and the End IP as
255.255.255.255. This field is N/A for One-to-One and
Server types.
N/A
Global IP
Start This is the starting global IP address (IGA). If you have a
dynamic IP, enter 0.0.0.0 as the Global IP Start. Note that
Global IP Start can be set to 0.0.0.0 only if the types are
Many-to-One or Server.
0.0.0.0
End This is the ending global IP address (IGA). This field is N/A
for One-to-One, Many-to-One and Server types.
N/A
Server
Mapping Set
Only available when Type is set to Server. Type a number
from 1 to 10 to choose a server set from menu 15.2.
Menu 15.1.1.1 Address Mapping Rule
Type= One-to-One
Local IP:
Start=
End = N/A
Global IP:
Start=
End = N/A
Server Mapping Set= N/A
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.