Xantrex Technology GT5.0-NA - Manual (Page 49)

5
Monitoring the
Inverter
Chapter 5 contains information for understanding the LCD screens and the
LED indicators.
Monitoring the Front Panel Display
During startup During startup, the inverter’s front panel LCD (see Figure 5-1) shows the screens
described in Table 5-1, “Startup Screens on GT Inverter Front Panel Display” on
page 5–2.
During waiting
period When the 305 second protection timer begins, the inverter displays “Reconnecting
in sss seconds” (see Table 5-10, “Special Message Screens” on page 5–10).
During operation When the protection timer stops, the GT Inverter begins delivering power,
indicated by the power output reading in the display (see Table 5-2, “Normal
Operation Default Screen” on page 5–4).
When the inverter is
offline or there is
fault condition When the GT Inverter is offline (at night, for example) or a fault condition has
been detected, the LCD shows a message screen to indicate that the inverter is
offline and to identify the specific fault condition. See Table 5-5, “Offline Mode
Default Display” on page 5–6 and Table 5-8, “Fault Message Screens” on page
5–8.
Figure 5-1 Front Panel LCD
Grid Tie Solar Inverter
Tap Xantrex logo for
backlight and status
screens