Xantrex Technology GT5.0-NA - Manual (Page 59)

Status Indicator Lights
975-0320-01-01 5–11
Status Indicator Lights
The GT Inverter has two status indicator lights (LEDs) located below the front
panel LCD (Figure 5-2). These LEDs indicate the inverter’s status (Table 5-11)
and assist in troubleshooting the performance of the unit.
Only one indicator light will be lit at any time.
Table 5-11 Status Indicator LEDs
LED on Means
GREEN GT Inverter is on (DC voltage and AC voltage are qualified and the
protection timer has finished) and delivering power. No action
required. Turns off when a fault state is detected.
RED Ground fault condition detected.
Check for any fault messages on the display (see Table 5-8), and refer
also to Table 6-1, “Troubleshooting the GT Inverter” on page 6–9 to
resolve the fault condition.
Figure 5-2 Status Indicator Lights
Grid Tie Solar Inverter
Green LED
Red LED